|
|
| MIG/MAG Equipment
for Industrial Use |
|
|
 Properties
Welding up to 1.6 mm solid and fluxcored wires
with or without gas.
Suitable for welding any metal such as
stainless steel, aluminum and cupper.
-
Welding voltage adjustments through 30 steps.
2 Inductor choices for better arc stability.
Analog voltmeter / ammeter for easy
monitoring.
Fan-cooled and thermally protected against
overloading.
Seperate 4 WD wire feeder up to 15 mt. harness
length.
Burn-back and Post-gas flow timers are pre-set
for optimum performence.
Water cooling unit is made out of non
corrosive materials.
Water flow detector switch protects the torch
in case of insufficient water flow.
220 VAC auxiliary power receptacle.
Internal componentes are protected against the
effects of moisture and heavy dust.
Factory installed running-gear / cylinder-rack
for better mobility in the work shop.
| |
|
| Files : |
|
|
| Applications : |
|
For MIG/MAG welding of
thick metals such as mild steel, stainless steel,
aluminum and cupper. It's 4WD and powerfull heavy duty
power source allows flux cored wire welding up to 1.6
mm. as well. This machine is a very good choice for
industries where welding is an all day long process in 3
shifts. Therefore this macine is ideal for Shipyards,
Transport Systems Manufacturing Industry, All sort of
Heavy Steel Section Constructions and
Cladding. |
|
| Line Voltage (3 Phase) |
380 V / 50 Hz |
| Input
Power (60%) |
23.7 kVA |
| Input
Current (60%) |
36 A |
| Recomended Line Fuses |
3 x 40 A |
| - |
|
| Rated
Welding Current (60%) |
450 ADC |
| Welding
Current Range |
45 - 500 ADC |
| Open
Circuit Voltage |
17- 48 VDC |
| Voltage
Adjustment Steps (Course x Fine) |
3 x 7 |
| - |
|
| Dimensions ( l x w x h ) |
1030 x 440 x 740 mm |
| Weight
|
158 kg |
| Protection Class |
IP 21 |
|
|
| Wire Feeding Roll Size |
1.2 / 1.6 mm |
| Wire
Feeding Speed |
2 - 20 m/min |
| Trigger
Control |
2/4 stroke |
| - |
|
| Dimensions ( l x w x h ) |
560 x 210 x 380 mm |
| Weight
(without wire & harness) |
26 kg |
| Harness
Length |
5 m |
|
|
| Welding Current (100%, with CO2) |
600 ADC |
| Welding
Current (100%, with MIX GAS / OPENARC) |
550 ADC |
| Cooling
Type |
Water |
| Length
|
3 m |
| Weight
|
1.6 kg |
| Voltage
Class |
L |
| Std.
Accessories : |
|
| Liner
|
1.2 / 1.6 mm |
| Contact
Tip |
1.2 mm |
| Nozzle
|
16 mm |
|
|
| Water Tank Capacity |
6.5 lt |
| Flow
Rate |
|
| Maximum
Allowed Hose Length |
|
| - |
|
| Dimensions ( l x w x h ) |
758 x 440 x 172 mm |
| Weight
|
28 kg |
|
|
| Work
Cable (50mm2 - 3m) |
|
1
|
| Regulator / Flowmeter |
|
1
|
| Heater
for CO2 |
|
1
|
| Plastic
Adaptor for Wire Baskets |
|
1
|
| Nozzle
Cleaning Tool |
|
1
|
| - |
|
|
| SPARES
: |
|
|
| Nozzle
(16 mm) |
|
1
|
| Contact
Tip (1.2) |
|
5
|
| Contact
Tip (1.6) |
|
5
|
| Gas
Diffuser (MTA600W) |
|
1
|
| Contact
Tip Holder |
|
1
|
| Fuse
(0.8A, 1A, 2A, 6A) |
|
1 set
|
|
|
| Feeding
Roll for Steel (0.8-1.0) |
|
|
| Feeding
Roll for Steel (1.2-1.6) |
|
|
| Feeding
Roll for Aluminum (0.8-1.0) |
|
|
| Feeding
Roll for Aluminum (1.2-1.6) |
|
|
| Liner
for Steel (0.8-1.0) |
|
|
| Liner
for Steel (1.2-1.6) |
|
|
| Liner
for Aluminum (0.8-1.0) |
|
|
| Liner
for Aluminum (1.2-1.6) |
|
|
| Contact
Tip 0.8 (steel/alu) |
|
|
| Contact
Tip 1.0 (steel/alu) |
|
|
| Contact
Tip 1.2 (steel/alu) |
|
|
| Contact
Tip 1.6 (steel/alu) |
|
|
| Nozzle
14 mm |
|
|
| Nozzle
16 mm |
|
|
| Nozul
20 mm |
|
|
|
|
|
| DT 40
(Turn Table for Wire Feeder) |
|
| TS
45S-2 (Wire Feeder with 2 mt. Harness) |
|
| TS
45S-5 (Wire Feeder with 5 mt. Harness) |
|
| TS
45S-10 (Wire Feeder with 10 mt. Harness) |
|
| TS
47S-15 (Wire Feeder with 15 mt. Harness) |
|
| - |
|
| MTA
600W-4 |
|
|
|
|
