|
|
| MIG/MAG Equipment
for Heavy Duty Applications |
|
|
 Properties
Welding up to 2.4 mm solid and fluxcored wires
with or without gas.
-
Welding voltage adjustment through 30 steps.
3 Inductor outlets for better arc stability
through a large current scale.
Analog voltmeter/ammeter.
Fan-cooled and thermally protected against
overloading.
Seperate 4 WD wire feeder up to 15 mt. harness
length.
Burn-back and post-gas flow timers are pre-set
for optimum performance
Water cooling system is made out of non
corrossive materials
Water flow detector switch protects the torch
in case of insufficient water flow.
220 VAC auxiliary power receptacle.
Internal components are protected against the
effects of moisture and heavy dust
Factory installed running-gear / cylinder-rack
for better mobility in the work shop.
| |
|
| Files : |
|
|
| Applications : |
|
This machine should be
selected for very demanding aplications such as very
thick metal welding, especially in very hot climates and
hardfacing with fluxcored wires up to 2.4 mm. Typical
areas of use are, large sectioned steel constructions,
railroad vehicle construction, ship building, earth
moving equipment construction and maintenance, forklift
and general machine construction,cement and brick
industry maintenance. |
|
| Line Voltage (3 Phase) |
380 V / 50 Hz |
| Input
Power (60%) |
30 KVA |
| Input
Current (60%) |
46 A |
| Recommended Line Fuses |
3 x 50 A |
| - |
|
| Rated
Welding Current (60%) |
550 ADC |
| Welding
Current Range |
60 - 650 ADC |
| Open
Circuit Voltage |
19 - 53 VDC |
| Voltage
Adjustment Steps (Course x Fine) |
3 x 10 |
| Dimensions ( l x w x h) |
1030 x 440 x 740 mm |
| Weight
|
199 kg |
| Protection Class |
IP 21 |
|
|
| Wire Feeding Roll Size |
1.2 / 1.6 mm |
| Wire
Feeding Speed |
20 mt/min |
| Trigger
Control |
2 / 4 |
| - |
|
| Dimensions ( l x w x h) |
560 x 210 x 380 mm |
| Weight
(without wire & harness) |
26 kg |
| Harness
Length |
5 mt |
|
|
| Welding Current (100%) with CO2 |
600 ADC |
| Welding
Current (100%) with MIX GAS / OPEN ARC |
550 ADC |
| Cooling
Type |
Water |
| Length
|
3 mt |
| Weight
|
1.6 kg |
| Voltage
Class |
L |
| Std.
Accessories : |
|
| Liner
|
1.2 / 1.6 mm |
| Contact
Tip |
1.2 mm |
| Nozzle
|
16 mm |
|
|
| Water Tank Capacity |
6.5 lt |
| Flow
Rate |
lt / min |
| - |
|
| Dimensions ( l x w x h) |
758 x 440 x 172 mm |
| Weight
|
28 kg |
|
|
| Work
Cable ( 70mm2-3mt.) |
|
1
|
| Regulator / Flowmeter |
|
1
|
| Heater
for CO2 |
|
1
|
| Plastic
Adaptor for Wire Baskets |
|
1
|
| Nozzle
Cleaning Tool |
|
1
|
| SPARES
: |
|
|
| Nozle
(16 mm.) |
|
2
|
| Contact
Tip (1.2) |
|
5
|
| Contact
Tip (1.6) |
|
5
|
| Gas
Diffuser |
|
1
|
| Contact
Tip Holder |
|
1
|
| Fuse
(0.8A, 1A, 2A, 6A) |
|
1 set
|
|
|
| Feeding
Roll for Steel (0.8-1.0) |
|
|
| Feeding
Roll for Steel (1.2-1.6) |
|
|
| Feeding
Roll for Aluminum (0.8-1.0) |
|
|
| Feeding
Roll for Aluminum (1.2-1.6) |
|
|
| Knurelled Feeding Roll (1.6-2.4) |
|
|
| Liner
for Steel (0.8-1.0) |
|
|
| Liner
for Steel (1.2-1.6) |
|
|
| Liner
for Steel (1.6-2.4) |
|
|
| Liner
for Aluminum (0.8-1.0) |
|
|
| Liner
for Aluminum (1.2-1.6) |
|
|
| Contact
Tip 0.8 (steel/alu) |
|
|
| Contact
Tip 1.0 (steel/alu) |
|
|
| Contact
Tip 1.2 (steel/alu) |
|
|
| Contact
Tip 1.6 (steel/alu) |
|
|
| Contact
Tip 2.4 (steel/alu) |
|
|
| Nozzle
14 mm |
|
|
| Nozzle
16 mm |
|
|
|
|
|
| DT 40
(Turn Table for Wire Feeder) |
|
| TS
45S-2 (Wire Feeder with 2 mt. Harness) |
|
| TS
47S-10 (Wire Feeder with 10 mt. Harness) |
|
| TS
49S-15 (Wire Feeder with 15 mt. Harness) |
|
| - |
|
| MTA
600W-4 |
|
|
|
|
