|
|
| 450 Amp. Air Cooled
MIG/MAG Equipment for Intensive Fabrications |
|
|
 Properties
Designed for 24 hour welding in an industrial
environment.
User friendly, robust and reliable.
-
Welding voltage adjustment is through 21
steps.
2 Inductor choices for better arc stability.
Analog voltmeter / ammeter for easy
monitoring.
Fan-cooled and thermally protected against
overloading.
Seperate 4WD wire feeder up to 15 mt. harness
length.
Burn-back and Post-gas flow timers are pre-set
for optimum performance.
220 VAC auxilliary power receptacle.
Internal components are protected against the
effects of moisture and heavy dust.
Factory installed running-gear / cylinder-rack
for better mobility in the work shop.
| |
|
| Files : |
|
|
| Applications : |
|
For MIG/MAG welding of
thick metals, such as mild steel, stainless steel,
aluminum and cupper. This machine is suitable for all
day long welding of unalloyed steels with 1.2 mm solid
or fluxcored wire in mild climatic areas. With lower
duty cycles it is also possible to weld with 1.6 mm
wires. For any kind of metal fabrication, where good
welding characteristics is required together with
robustness and ease of use, this machine is a perfect
choice. |
|
| Line Voltage (3 Phase) |
380 V / 50 Hz |
| Input
Power (60%) |
23.7 kVA |
| Input
Current (60%) |
36 A |
| Recommended Line Fuses |
3 x 40 A |
| Rated
Welding Current (60%) |
450 ADC |
| Welding
Current Range |
45 - 500 ADC |
| Open
Circuit Voltage |
17 - 48 VDC |
| Voltage
Adjustment Steps (Course x Fine) |
3 x 7 |
| - |
|
| Dimensions ( l x w x h ) |
1030 x 440 x 740 mm |
| Weight
|
158 kg |
| Protection Class |
IP 21 |
|
|
| Wire Feeding Roll Size |
1.2-1.6 mm |
| Wire
Feeding Speed |
2 - 20 m/min |
| Trigger
Control |
2/4 stroke |
| - |
|
| Dimensions ( l x w x h ) |
560 x 210 x 380 mm |
| Weight
(without wire & harness) |
26 kg |
| Harness
Length |
5 m |
|
|
| Welding Current (60%, with CO2) |
500 ADC |
| Welding
Current (60%, with MIX GAS / OPEN ARC) |
400 ADC |
| Cooling
Type |
Air |
| Length
|
3 m |
| Weight
|
1.8 kg |
| Voltage
Class |
L |
| Std.
Accessories : |
|
| Liner
|
1.2 / 1.6 mm |
| Contact
Tip |
1.2 mm |
| Nozzle
|
16 mm |
|
|
| Work
Cable ( 50 mm2 - 3 mt) |
|
1
|
| Regulator / Flowmeter |
|
1
|
| Heater
for CO2 |
|
1
|
| Plastic
Adaptor for Wire Baskets (K 300) |
|
1
|
| Nozzle
Cleaning Tool |
|
1
|
| - |
|
|
| SPARES
: |
|
|
| Nozzle
(16 mm) |
|
1
|
| Contact
Tip (1.2 mm) |
|
5
|
| Contact
Tip (1.0 mm) |
|
5
|
| Gas
Diffuser |
|
1 pk
|
| - |
|
|
| Fuses
(0.8A, 1.0A, 2A, 6A) |
|
1 set
|
|
|
| Feeding
Roll for Steel (0.8-1.0) |
|
2
|
| Feeding
Roll for Steel (1.2-1.6) |
|
2
|
| Feeding
Roll for Aluminum (0.8-1.0) |
|
2
|
| Feeding
Roll for Aluminum (1.2-1.6) |
|
2
|
| Liner
for Steel (0.8/1.0) |
|
1
|
| Liner
for Steel (1.2/1.6) |
|
1
|
| Liner
for Aluminım (0.8/1.0) |
|
1
|
| Liner
for Aluminım (1.2/1.6) |
|
1
|
| Contact
Tip 0.8 (steel/alu) |
|
20
|
| Contact
Tip 1.0 (steel/alu) |
|
20
|
| Contact
Tip 1.2 (steel/alu) |
|
20
|
| Contact
Tip 1.6 (steel/alu) |
|
20
|
| - |
|
|
| Nozzle
14 mm |
|
5
|
| Nozzle
18 mm |
|
5
|
|
|
|
| DT 40
(Turn Table for Wİre Feeder) |
|
| TS 45-2
(wire Feeder with 2 mt Harness) |
|
| TS 45-5
(Wire Feeder with 5 mt Harness) |
|
| TS
45-10 (Wire Feeder with 10 mt Harness) |
|
| TS
45-15 (Wire Feeder with 15 mt Harness) |
|
| - |
|
| MTA
450-4 |
|
|
|
|
