CUT - OFF DISCS
|
Cut-off wheels or abrasive saws are used to cut or severe materials
to prescribed dimensions. Cut-off wheels compete with the shear,
.the saw and flame cutting. These wheels are available with or without
reinforcing; the need for reinforcing depends upon the severity
of the operation.
Cut-off (Non-Reinforced)
Non- reinforced cut-off wheels are designed for machines where the
work is securely clamped, the wheel adequately guarded and the machine
design is such that the wheel operates in a controlled cutting plane.
Cut-off (Reinforced)
Cut-off wheels containing a strengthening fabric or filaments incorporated
throughout the entire diameter are referred to as "Reinforced
wheels" Reinforced wheels are designed to resist breakage caused
by severe cross bending. All portable cut-off, swing frame, locked
head push through, and foundry chop stroke operations require reinforced
cut-off wheels. In addition, a reinforced cut-off wheel is required
on any operation where the grinding machine is hand guided or where
the work is not securely clamped. Wheels are straight configuration
with diameters usually ranging form 75mm to 500mm. The wheel thickness
is determined by grit size, construction and wheel diameter; however,
maximum thickness is less than 6mm.
CUT - OFF DISCS
|
|
|
|
A 36 T BF 80 |
METAL
|
General-purpose discs for all cutting work on steel and
cast, medium-hard made of normal grade A=NK corundum for
an optimized ratio between cutting performance and disc
life.
|
>>>
Click Here To Continue |
|
|
|
|
|
C 24 S BF 80 |
MASONRY
|
Medium-hard general-purpose disc for natural stone and
artifical stone. Wide band performance
|
>>>
Click Here To Continue |
|
|
|
|
|
A 36 TS BF 80 |
INDUSTRY
|
Fast metal removal, industrial quality cutting-off wheels
with a very long life. Best for very demanding markets.
|
>>>
Click Here To Continue |
|
|
|
|
|
A 24 P BF 80 |
INOX
|
Ideally suited for cuts through large section of steel,
high tensile steel, stainless steel castings.
|
>>>
Click Here To Continue |
|
|
|
|
|
C 24 Q BF 80 |
MARBLE
|
Special wheel for natural stone (marble),
artifical stone, masonry and ceramics for highest performance.
|
>>>
Click Here To Continue |
|
|
|
|
|
A 36 T BF 80 |
METAL
|
Cut-off wheels for stationary machines. Universal discs
for use on steel, non-ferrous metals, enables fast burr-free
cutting. Reinforced with the highest quality glass fiber
for the toughest conditions.
|
>>>
Click Here To Continue |
|
|
|
|
|
THIN LINE |
|
Thin Line with its low wheel thickess enables fast cutting
action without burr. Produced to suit high-grade steel.
No addition of ferrous, sulphurous or cholorinated fillers.
|
>>>
Click Here To Continue |
|
|
|
|
|
CUT & CUT |
|
New addition to our Thin Line program. Best for the hard
works and applications. Very long life and fast cutting
action.
|
>>>
Click Here To Continue |
|
|
|