|
|
| Product Name |
|
| PATTEX Montage Adhesives |
| Description |
| Description
Dispersion based, universal adhesive.
Application Fields
- Insulation on boards (ie. Styrophor),
- Wooden panels,
- Wooden door-window linings,
- Acustic panels,
- PVC cable canals,
- Fibrous cement boards,
- Gypsum plaster boards,
- Tiles, ceramics,
- Gypsum decorative panels,
- Repairing and fitting.
Special Features
Indoor and outdoor application,
- Solvent free,
- High initial strength,
- High breaking resistance,
- Correction possibility in few minutes,
- Surface levelling providing thick material,
- Non ageing,
- Weathering resistance,
- Pin point or line application,
- Special cartridge piston providing full usage,
- Transparent cartridge indicates remaining material
Technical Data
Density : 1.25 g/cm3
Heat resistance : -20 to +70°C
Application temperature : +10°C
Curing time : 2 mm/day
Open time : 15 min.
Maximum application thickness : 10 mm
Consumption
20 to 80 g/m depending on the material to be bonded.
Application
Cut open cartridge, screw on nozzle and cut of tip at desired angle. Insert cartridge in gun and apply Pattex Montage to the material to be bonded or to surface by spreading or pin point application. Thickness of the adhesive depends on the weight of material to be bonded. Press well or support bonding after the application.
Cleaning The Equipment
Clean cartridge gun with water after application. Remove excess with wet cloth.
Dimensions And Colour
Cartons, containing 20 cartridges of 310 ml ( 400 g ) each.
Storage
1 year if stored in a cool, dry place.
Important Notes
In case of contact with skin and eyes, wash with water |
|
