|
|
| Product Name |
|
| SİSTA Silicones |
| Description |
| Description
Single component, acetate curing sealant.
Application Fields
Glazing timber-framed, metal-framed and plastic framed windows and doors.
-Both in new buildings and in renovation.
-In all heavy duty connecting joints requiring a high degree of stability to ultraviolet light, moisture, heat, expansion, etc.
-In bathrooms, kitchens’ tile joints exposed to water.
-Sealing between glass blocks or sections.
-Sealing windows and doors against draft, noise, moisture, dirt, etc.
Special Features
-Single component
-%100 pure silicone
-Moisture curing
-Solvent free
-Rapid curing
-Highly elastic
-Quick recovery (100%)
-Excellent adhesion, -High load capacity
- Antibacterial
-UV resistant
-Non fading
-Meets the requirements of DIN 18545, Groupe E
-Has a test certificate regarding improvement of the “A” value
Technical Data
-Density : 1.02 g/ml
-Application temperature : From +4 to 40°C
-Skin formation : 10 Min at room temperature.
-Curing time : 2 days/5 mm
-Shore A hardness : 20
-Modulus of elasticity : 5 N/cm2
-Temperature resistance : -55 °C to +200°C
-Shrinkage : 3,5% (DIN 52451)
-Permanent elasticity : 25%
-Maximum joint width : 30 mm
-Heat conductivity : 0.17 W/Km (DIN 53612)
Consumption
Dimension : Consumption for 1 m : Length obtained by :
1 cartridge (310 ml) 5x5 mm 25 ml 12.5 m
10x10 mm 100 ml 3.1 m
15x10 mm 150 ml 2.1 m 25x12 mm
300 ml 1 m
Application
Mask joint edges with adhesive tape. Cut open cartridge, screw on nozzle and cut of tip at desired angle. Insert cartridge in gun and apply Sista bubble-free continuously into the joint. Fill the joint completely. Smooth Sista with soapy water immediately after application. Remove adhesive tape and smooth again.
Cleaning The Equipment
Use alcohol to remove excess uncured.
Dimensions And Colour
Cartons, containing 20 cartridges of 310 ml each. Cartons, containing 20 tubes of 50 g each.
Storage
12 months if stored in a cool, dry place.
Important Notes
No warning sign necessary.
Other Information
Colour :
Transparent, white, black.
Pretreatment of Joints :
Joints must be clean, free for grease and dust. |
|
